How To Apply

Application

1. Setup for Perfect Adhesion

Curl lashes first to create a seamless blend. Pinch and gently peel clusters from the tray to avoid bending.

2. Bond Application Tips

Apply a thin, even layer of bond under your lashes. Wait 30-35 seconds for optimal tackiness.

3. Position with Precision

Use tweezers to align clusters with your natural lash line.

4. Final Seal for Long-Lasting Hold

Brush a thin coat of sealant at the base. Wait 30-35s, then press clusters with tweezers to lock them in place.

1. Start with a Gentle Remover

Apply AiryCute remover directly to the clusters. Avoid contact with natural lashes.

2. Wait for Softening

Let the solution dissolve the bond for 30-35 seconds.

3. Remove Safely

Use tweezers to gently slide clusters off—no pulling to prevent damage.

4. Finish with a Clean Brush

Use a spoolie to clear any residual glue and tidy natural lashes.

Clean Your Eyelids Thoroughly
Remove oils, dust, and impurities with a gentle cleanser before applying lashes. Clean surfaces ensure better bond adhesion.
Use Bond Sparingly
Apply a thin, even layer of lash glue to the root of the cluster and your natural lashes. Avoid overusing bond to prevent clumping.
Wait 10 Seconds Before Bonding
Let the adhesive dry slightly (10 seconds) to create a stronger hold. Press the cluster gently onto your lashes without forcing it.
Seal the Clusters for Extra Hold
Apply a small amount of sealant to both sides of the tweezers. Squeeze the cluster and your lashes together to lock them in place.
Avoid Water for 12–24 Hours
Keep your eyes dry for the first day to let the bond fully set. Skip swimming, saunas, or hot showers immediately after application.
Don’t Rub or Pull
Refrain from touching or rubbing your eyes until the bond is completely dry. Premature movement can loosen the clusters.
Avoid High Heat Environments
Stay away from saunas, hot springs, or direct sunlight for 24 hours post-application. Heat weakens adhesive strength.